1. Low pressure 8-20bar
configuration of our industrial air compressor:
●The standard mode is air adjustment mode, also can be electric adjustment mode according to the customer(only apply to motor below 15HP)
●Each single unit is equipped with air tank when composed of double machine unit. And can be flexibly composed, without purchasing separately and thus save cost.
●With low oil level switch, when the oil level is too low, air compressor will stop running, thus can protech machine.
●Using air cooling system, inter and post cooler, with the characteristic of compact structure, low speed.
●With a 4 micron air intake filter to ensure compressed air clean.
1. Light alloy piston effectively reduces weight and reduces mechanical power consumption。
2.Cast iron cylinder heads, and independent seat enhance the life of the equipment.
3. Equipped with the king of air valve “Herbiger” automatic efficient valve they make the equipment big capacity, more action, high efficiency, long life service.
4. Special design flywheel, V belt drive reduce the operating noise
5. Removable outdoor air intake silencing filter and 10 micron filtration precision effectively improve the quality of the air intake and reduce the inlet temperature.
6.Rotating components adopt two SKF rolling bearings, which ensure the stable operation and greatly reduce the wear and tear of the bearing.
●cast iron structure: The air cylinder and the crank case use 100% cast iron material, guarantees the unit the service life.
● air cylinder: The deep wing piece type, the independent casting air cylinder may 360 degrees eliminations produce compressed air quantity of heat. Between the air cylinder and the crank case with the bold fastening, is advantageous for the routine maintenance and the maintenance.
●flywheel: The flywheel leaf blade produces one kind “the tornado” the type air current to cool the deep wing piece type air cylinder, the middle chiller and the after cooler.
●intercooler: The finned tube, the immediate packing blows in the flywheel gas place.
●after cooler: The finned tube, the forced-air cooling type, install equally with the middle chiller in the flywheel gas blow place. Compressed air which discharges after the after cooler compared to ambient temperature high approximately about 20℃
●offcenter unloading gear: Release from cold and in air cylinder’s air, prevents the unit overload start.
● adjusting device: All high-pressured unit disposes the automatic start/engine off control, moreover may choose the constant speed control and the dual controls.
● self-refrigeration draindown system: The self-refrigeration wash water valve installs on the exhaust separator/valve’s support, when the compressor engine off or unloads when the constant speed control mode, discharges the condensed water automatically.
● electrical machinery: TEFC, the IP54 electrical machinery, conforms to the IEC standard.
● actuation: The entire seal shroud “V” the belt transmission, the movement is steady.
● foundation: On the Chungking Steel Works structure’s foundation opens has the groove, the electrical machinery may move, is advantageous for the fastening “V” the leather belt.
2. Medium pressure 30-40bar
1、 Light alloy piston effectively reduces weight and reduces mechanical power consumption
2、 Cast iron cylinder heads, and independent seat enhance the life of the equipment.
3、 Equipped with the king of air valve “Herbiger” automatic efficient valve they make the equipment big capacity, more action, high efficiency, long life service.
4、 Special design flywheel, V belt drive reduce the operating noise
5、 Removable outdoor air intake silencing filter and 10 micron filtration precision effectively improve the quality of the air intake and reduce the inlet temperature.
6、 Rotating components adopt two SKF rolling bearings, which ensure the stable operation and greatly reduce the wear and tear of the bearing.
7、 The main wear parts service life
piston ring 6000hours (according to the working environment）
valve plate 6000hours (according to the working environment）
3. Oil free big flow high pressure air compressor(Air flow More than 8.5m3/min)
Oil free air compressor
Oil flow chart
Oil pool——-Oil filter—Oil pump–Crankshaft-Rod connecting-cross part—-Oil pool
Compressor lubrication system adopt pressure lubrication, including external gear pump with a spindle device
1.Your company is a trading company or a direct factory?
We are a direct factory located in Zhangjiagang City. Very close to Shanghai and Wuxi (airport and train provided). If you arrive in Shanghai or Wuxi, we can pick you up to visit our factory.
2.If we buy your machine, what is your guarantee or guarantee of quality?
We provide you with high-quality machines with 1-year warranty and lifetime technical support.
3.How to ensure the safety of your funds and deliver on time?
1/Through Alibaba’s letter guarantee service, it will ensure on-time delivery and the quality of the equipment to be purchased.
2/Through the letter of credit, you can easily lock the delivery time.
3/After visiting the factory, you can ensure the authenticity of our bank account.
4.How to ensure the quality of the FAYGOUNION machinery!
1/In order to ensure the accuracy of each part, we are equipped with various professional processing equipment, and we have accumulated professional processing methods in the past few years.
2/Each component before assembly needs to be strictly controlled by inspectors.
3/After all equipment is completed, we will connect all machines and run the entire production line for at least 12 hours to ensure the stable operation of the customer’s factory.
After Sales Service
1.Installation, debug We will arrange seasoned technician for debug and test production at the same time make the equipment reach the rated producing capacity of the line.
Our company offer technology training to customer. The content of training is structure and maintenance of equipment, control and operation of equipment. After training, the technician of buyer could master the operation and maintenance, could adjust the process and treat different failures.
3.the Standard service
1’We can send you the video of the running machine.
2’You are welcome to come to visit our factory,and see the machine running.
4.We can design the machines according your requirements,at the same time we will give you our professional suggestion,as you know,we have been in this industry for 22 years.
5.well-trained & experienced staff are to answer all your inquiries in English and Chinese
6 .12 Months guarantee and life-long technical support.
7.Your business relationship with us will be confidential to any third party.
8. Good after-sale service offered, please get back to us if you got any questions