Project Description

Screw Compresssor

Introduction: Full-automatically load and unload control the input air full automatically. Compressor will start automatically when there is no pressure, and will stop working when the pressure is full in air tank. When the compressor is short of electricity, the electricity will be in reverse. When the pressure is too high, the temperature is also high, which can protect itself full-automatically. You can use our compressor without any workers on duty.

ask for quote

Introduction: Full-automatically load and unload control the input air full automatically. Compressor will start automatically when there is no pressure, and will stop working when the pressure is full in air tank. When the compressor is short of electricity, the electricity will be in reverse. When the pressure is too high, the temperature is also high, which can protect itself full-automatically. You can use our compressor without any workers on duty.

Any model we have belt drive, direct drive, air cooling, water cooling. With our without inverter.
Our technology adopts the third era non-symmetry tooth-model rotor in 5:6. The distance between rotor we keep is in 0.003 inch, which will have no abrasion for ever. The fall in tooth of rotor and cost of circumfluence is very small. Then it will be in higher effort than 4:6 about 10-20%, reducing electricity about 20%. We use SKF bearing, which prolongs the life of main machine. Our machine can work continuously in 24 hours
Motor: Y-△starter; Voltage 380V; Frequency 50Hz; Protection Ip-54; Insulation Class F